Polymer emulsion curing agent and bonding agent
Uses
Nitobond AR is recommended as a curing membrane for Renderoc repairs.
Nitobond AR can also be used as a bonding agent for Patchroc and Paveroc products (refer to the product TDS).
Advantages
- Single component - no site mixing
- Easy to use - ready to use straight from container
- Cost effective - economical in use
- Effective curing membrane for most Renderoc repair mortars
Description
Nitobond AR is a single component acrylic polymer emulsion designed as a curing membrane for most Renderoc repair products.
Nitobond AR has a VOC content of 13.5g / litre.
Application Instructions
Preparation
All surfaces should be clean and free from dust and contamination.
Application
The Nitobond AR is to be sprayed on to the surface of the
finished mortar in a continuous film. Large areas should be
cured as trowelling progresses (0.5m² at a time) without waiting
for completion of the entire area. In fast drying conditions,
supplementary curing with polythene sheeting taped down at
the edges must be used. In cold conditions, the finished repair
must be protected from freezing.
Cleaning
Wash all equipment with clean water immediately after use.