HOW TO USE
Clean the surface and remove any mechanical residue nails, brick dust, crushed stone, etc Apply
30 to 60 grams of product per square meter of surface sprinkling the powder over the surface and place the machine s felt pad on top of the powder, then dampen the area till to obtain a milky creamy consistency Work a 1 - 2 square meters at a time Friction will cause the water to evaporate add ware' to maintain the product creamy With the drying the marble will be polished Verify the glossy effect with a window-wiper A patina of product will remain on the surface;
on a small area use a rag to remove tile surface patina and check the level of gloss underneath and repeat the procedure if desired Once the pol1shing phase is completed on the ent1re surface to be treated, remove the res1dual pat1na by washing with Neutrex diluted in a 15 water solution. Rinse with clear water. After drying (24 to 48 hours) apply the sealer lmperstontopreservethepolishandavoidsta1ningfromoil, food,etc.
IMPORTANT For best results, use a heavy-duty, professional buffing machine capable of producing
significant friction, a common single-head polishing machine, better if ballasted, may also be used
The latter is particularly recommended for restoring the polish on old surfaces
Wear suitable protective clothing, gloves and eye protection
Irritant: Irritating to eyes. In case of eye contact, rinse with pleanty of water and seek medical advice
Only use in a well ventilated area
Do not breathe mist or spray
Keep out of reach of children
Keep away from pets
Avoid contact with eyes and skin
Wash hands after use
If swallowed, DO NOT induce vomiting. seek medical advice immediately and show this container and label
Store in a cool, dry place