KEMGROUT FLEXIBLE GROUT 2KG AND 10 KGS

Color
500 VOLCANIC ASH
501 WHITE
503 CHARCOAL
504 SLATE GREY
505 LIGHT GREY
506 LIGHT BLUE
506 LIGHT BLUE (limited stock 10 kgs)
507 MISTY GREY / SILVER ASH
512 GREEN
512 GREEN (not available in 10 kgs)
518 IVORY
519 VANILLA
522 BEIGE
525 ALMOND
527 TAN
528 RIVER SAND
536 BURGANDY
543 DARK MOCCA discontinued
543 DARK MOCCA
544 LIGHT MOCCHA
547 DARK SAND
548 TERRACOTTA
549 MID GREY
Size

Kemgrout Flexible Grout, from Construction Chemicals. Waterproof tile grout - mould and fungi resistant. A dense, smooth, hard wearing, flexible polymer modified portland cement floor and wall grouting compound with resistance to mould and fungi growth for joints up to 5mm wide. A smooth, hard-wearing grout formulated for interior, exterior and wet area floor and wall grouting applications.

 

Kemgrout Flexible Colour Chart

FEATURES
Easy to use and clean
Dense, Flexible and Hard Wearing
Colour matches tiles
Mould and Fungi Resistant

COVERAGE (approximate)
Wall Tiles 0.5 kg/m2 Mosaics 1.0 kg/m2 over 3mm joints 1-2 kg/m2

PERFORMANCE DATA
Compression Strength (ASTM C109) 35MPa Moisture Absorption (ASTM C413) 5%

SPECIFICATION
This grout is a flexible polymer modified waterproof tile grout with a minimum compression strength of 35MPa such as Kemgrout Flexible manufactured by Construction Chemicals and shall be applied in accordance with the manufacturer’s application instructions.

MIXING
Mix grout to a thick, uniform, creamy mixture by adding powder to clean water - Ratio of approx. 0.5 litres of water to 2 kg of powder. Do not over mix, or add excessive water as shrinkage cracks may result. Allow to stand 5-10 minutes then restir before use.

APPLICATION
Grout tiles after the adhesive has had sufficient time to set – 24 hours for walls and 48 hours for floors. Dampen the tile joint with a sponge and apply the prepared grout, spreading 3m2 at a time, working well into the joints with a sponge, grouting tool or piece of rubber. Point joints with the edge of a grouting tool or piece of rubber to pack grout firmly into place. Remove surplus grout with a damp cloth or sponge. Do not allow the grout to harden on the face of the tiles.When a haze forms over the tiles, polish carefully with a dry cloth. • Allow grout to cure for 24 hours.

GROUT FLEXIBILITY
Mix grout with Flexible Grout Additive to increase flexibility in high movement situations i.e. timber floors and to increase resistance to staining and discoloration. Changes the colour of the grout to the next darker shade.

PRECAUTION
Colour shade variations can occur due to tile porosity variations, finishing techniques and site conditions. Do not use Kemgrout Flexible in expansion/movement joints, use Colour Seal. Due to movement inherent in timber floors, mix Kemgrout Flexible with Flexible Grout Additive. Swimming pools use Kemgrout Sanded.

APPLICATION:
FLOOR
WALL

SAFETY
Non-toxic, but contains cement which contains silica. Wear gloves and appropriate dusk mask.

SHELF LIFE
1 year