How to use
The areas to be restored need to be totally free from wax coatings, sealers and be cleaned
Step 1: Apply 10-15 gm Pumice Powder to 1 square metre.
Step 2: Add a small amount of water to the floor and using a polishing machine at slow speed and a fibre pad, work the powder into the stone creating a thin slurry, polishing in small, circular motions to control the slurry. Ensure the powder does not dry out.
Step 3: Keeping the movable slurry wet, continuously apply a small amount of water as needed (try to maintain a yogurt type consistency throughout)
Step 4: Depending on the type of marble, it may take 3-5 minutes to produce the honed finish required. stop to check throughout the process. This process can be repeated if necessary.
Step 5: When the required finish has been achieved, remove the slurry and rinse the area using a Stone Cleaner. Dry and Buff
Step 6: After the floor is to be left in the honed condition use a sealer to protect